供应6FC5357-0BB35-0AB0

商品规格：6FC5357-0BB35-0AB0关键字：6FC5357-0BB35-0AB0 NCU573.5B商品简述：SINUMERIK 840D 和 840DE 的新模块 NCU 573.5B 现已在市场上销售。 为了保持供货能力，模块 SINUMERIK NCU 573.5 将由兼容的后继产品 NCU 573.5B 所取代。 将针对新到的订单用后继产品替代原来的相应产品。

订货数据
  
6FC5357-0BB35-0AB0 SINUMERIK 840D/DE NCU 573.5B，1.4 GHz，128MB 不带系统软件存储器： NC 3MB，PLC 128 KB PROFIBUS DP，根据 IEC 61508 进行制造 

技术数据
NCU
 MLFB
 处理器
 PLC
 前板
 风扇箱
 
572.5B
 6FC5357-0BB25-0AB0
 Celeron M 1 GHz
 PLC 317-2DP (板载)
 类型 3 **)
 X
 
573.5B
 6FC5357-0BB35-0AB0
 Pentium M 1.4 GHz
 PLC 317-2DP (板载)
 类型 3 *)
 X
 

  

NCU
 CNC 用户存储器
较小/较大
 PLC 存储器
较小/较大
 功耗
[W]
 外形尺寸
WxHxD [mm]
 重量
[kg]
 
572.5B
 3 *** )/6MB
 128/768kB
 34
 46x316x220
 0,83
 
573.5B
 3 *** )/6MB
 128/768kB
 41
 46x316x220
 0,84
 

*) 为链接模块(选件)而准备
**) 不带用于链接模块的盲板
***) 可向用户提供基本配置：
- 具有 1.5MB (较大)的工艺周期和测量周期
- 带有 ShopMill/ShopTurn 1.2MB 



Features/customer benefits NC parameters
  
  
  
  
  
  
  
  
 
NCU
 561
.4   .5
 571
.4   .5
 572
.4   .5
 573
.4   .5
 
Processors
  
  
  
  
  
  
  
  
 
   Celeron 400MHz 1)
 X
 X
 X
 X
 X
  
  
  
 
   Celeron 650MHz
  
  
  
  
  
 X1)
 X
  
 
   Pentium III 933MHz
  
  
  
  
  
  
  
 X
 
CNC user memories
  
  
  
  
  
  
  
  
 
   Basic version 0.5MB; 
                     max.: 2.5MB*)
 X
  
 X
  
 X
  
  
  
 
   Basic version 2.5MB; 
                     max.: 2.5MB*)
  
  
  
  
  
  
 X
  
 
   Basic version 3MB**);
                     max.: 6MB
  
 X
  
 X
  
 X
  
 X
 

*) With technological cycles and measuring cycles, max. 1.5 MB freely available to the user. With ShopMill/ShopTurn 1.2 MB is available to the user in the basic version and therefore no additional CNC user memory option is possible.

**) In the basic version, free for the user:
      -- with technological cycles and measuring cycles, max. 1.5MB
      -- with ShopMill/ShopTurn 1.2 MB
1) Supplement: In NCU-SW 06.05.26 and later 3MB, see 20016757
  

PLC parameters
 315-2DP
NCU *.3
 314C-2DP
NCU *.4
 317-2DP
NCU *.5
 
Machining/processing time in ms/kA (1 kA = 1024 instructions, corresponds to approx. 3 kbyte)
- for bit commands (minimum)
- for word commands (minimum)
Factor for the cycle time for
user programs 1)
 

0.3
1.0

1
 

0.1
0.25 

0.35
 

0.03
0.1 

0.12
 
PLC user memory in kbyte
basic version
max. expansion
 
96
288
 
96
480
 
128 
768
 
Number of FBs, FCs
 each 256
 each 256
 2048 2)
 
Number of DBs
 399
 399
 20472)
 
Number of times
 128
 256
 512
 
Number of counters
 64
 256
 512
 
I/O scope for the cyclic process image
 each 128
 each 128
 each 256
 
I/O scope for the complete logical I/O address space
 each 1024
 each 1024
 each 4096 3)
 
Max. number of Profibus slaves
 63
 32
 125
 

  

Comments:
 
1)
 The increased performance refers to the computational performance available. Dependent on the technological conditions, this increase in performance goes into the complete result. Faster IPO clock cycles (as a result of faster processors) and lower PLC cycle times result in, in some cases, significantly improved technological results; e.g. shorter unit/clock cycle times, higher speeds for eccentric turning, higher feed rates for mould building.
 
2)
 The specified number is the upper address number that can be used; the total number of FBs, FCs and DBs is a maximum of 2048!
Note reservations that are applicable; refer to the current documentation.
 
3)
 4096 additional I/O addresses are available and can be seen in STEP 7. However, these are reserved for future applications. For compatibility reasons, these addresses may not be used.
The diagnostic addresses (presently at the upper end 1023, 1022) must be appropriately marshalled in the PLC project; refer to the current documentation.
 


Ordering data:
   

6FC5356-0BB14-0AA0


(predecessor:
6FC5356-0BB12-0AE0)
 SINUMERIK 840DE
NCU 561.4, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 0,5MB, PLC 96KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5356-0BB15-0AA0
 SINUMERIK 840DE
NCU 561.5, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 3MB, PLC 128KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB14-0AA0


(predecessor:
6FC5357-0BB12-0AE0)
 SINUMERIK 840DE
NCU 571.4, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 0,5MB, PLC 96KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB15-0AA0
 SINUMERIK 840DE
NCU 571.5, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 3MB, PLC 128KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB24-0AA0


(predecessor:
6FC5357-0BB23-0AE0)
 SINUMERIK 840DE
NCU 572.4, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 0,5MB, PLC 96KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB25-0AA0
 SINUMERIK 840DE
NCU 572.5, 400MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 3MB, PLC 128KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB34-0AA0


(predecessor:
6FC5357-0BB34-0AE1)
 SINUMERIK 840D/DE
NCU 573.4, 650MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 2.5MB, PLC 96KB
PREPARED FOR PROFIBUS-DP
ACC. TO IEC 61508
 
6FC5357-0BB35-0AA0


(predecessor:
6FC5357-0BB35-0AE0)
 SINUMERIK 840D/DE
NCU 573.5, 933MHZ, 64MB
WITHOUT SYSTEM SOFTWARE
MEMORY: NC 3MB, PLC 128KB
PREPARED FOR PROFIBUS-DP,
ACC. TO IEC 61508
 
6FC5247-0AA00-0AA3
 SINUMERIK 840D/DE
NCU-BOX TO ACCEPT/ACCOMMODATE
NCU 561.2/.3/.4/.5
NCU 571/571.2/.3/.4/.5
NCU 572/572.2/.3/.4/.5
NCU 573.2/.3/.4/.5
INCL. POWER SUPPLY UNIT, BATTERY AND FAN
 
Options:
 
6FC5251-0AD02-0AA0
 Expanded CNC user memory in steps of 1 MB
 
6FC5252-0AA03-0AA0
 Expanded PLC user memory in steps of 64 kB
 
6FC5252-0AD00-0AA0
 Peripheral I/O interface via Profibus DP
 


Additional technical data:

Refer to "Engineering Manual NCU Edition 12/2004"; (preliminary document; only in German)
PHD_1204_00.pdf ( 1203 KB ) ( 1203 KB )    

Supplement 03.03.2005
NCU system software, compatibility:
  

Hardware
    NCU system software
 
NCU 561.4
    V06.04.13 and later
 
NCU 571.4
 
NCU 572.4
    V05.03.27 and later
 
NCU 573.4
 
NCU 561.5
    Software version 6: as from 06.05.10
   Software version 7: s from 07.02.06
 
NCU 571.5
 
NCU 572.5
 
NCU 573.5
 



For more additional information, please contact your local Siemens office.